VOLTCRAFT IR 1200-50D Betriebsanleitung PDF herunterladen (Seite 45)



Additionally, the corresponding alarm function with the symbol “Hi” or “Lo” is displayed.

Conrm your input with “MODE” or push the measuring button (5). The settings are saved.

While measuring, a signal sounds when the corresponding alarm level is exceeded. The associated symbol “Hi” or

“Lo” starts to ash in the display.

The set alarm values are retained after deactivation.



The meter is equipped with an USB interface to transfer and store the measured values on a computer.

To connect the infrared thermometer to your computer, proceed as follows:

Start your computer with the operating system Windows® XP or higher.

Insert the enclosed software CD into a CD drive and follow the instructions on the screen.

If the automatic programme installation does not start, select the CD drive in Explorer and start the installation

programme “setup.exe” manually. Follow the instructions on the screen.

After successful installation of the programme, install the USB driver manually as well. For this, choose the CD drive

in Explorer and open the folder “USB Driver”. Start the installation programme “cp210xVCPInstaller.exe” manually.

Follow the instructions on the screen.

Activate the USB interface in the system setting menu “Set”, sub-item “Send Data” at the meter.

If required, activate the continuous measurement function to prevent automatic deactivation during possible measur-

ing breaks. The data transfer only takes place with the meter activated.

Open the lateral cover (1) at the meter. Plug the enclosed USB cable into the lateral mini USB socket and connect

the other end of the cable to a free USB interface on your computer.

The computer will automatically recognise a new device. After successful installation, you can start the measuring

software.

If the data connection has been established, “Connected” is displayed.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 101 102

Keine Kommentare

VOLTCRAFT IR 1200-50D Betriebsanleitung Seite 45