VOLTCRAFT VC940 - V06-09 Betriebsanleitung PDF herunterladen (Seite 29)

MultiSystem 4010

Operating Instructions

Rev. 1.5 / 120816 english

Page 29 of 45

Settings at the function „Multimeter“ (Option)

Here you may assign a name to the channel and select the type of the connected Multimeter.

Currently the types Voltcraft VC 820, VC 920, 940 and 960 are supported.

Press

to save the channel settings.

6.4.7. Configure channels for particle counter Patrick

Information

The values for Node-ID, baud rate and interface can be set in the

Patrick operation menu. Only use the settings programmed there, or

set them to the standard settings used in the following sections.

The instrument must be equipped with the option „CAN“ to be able to

connect the particle counter Patrick (3160-00-76.00). Additionally you

need the cable 8824-T6-05.00 (length 5.0 m) or 8824-T6-10.00 (length

10.0 m).

Patrick produces measuring data for the four particle size classes 4 / 6 /

14 / 21 µm according to ISO- or SAE-norms. One free channel is required

to display each particle size class, the MultiSystem 4010 is able to display

the maximum of five size classes. Typically only four size classes either according ot ISO or SAE will

be displayed.

Configure a channel for a size class

Open the menu “Channels”, highlight a free channel (e.g. Ch8) and press

. Set the options as

shown here:

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 44 45

Keine Kommentare

VOLTCRAFT VC940 - V06-09 Betriebsanleitung Seite 29